| Cable diameter |
: |
8.0mm |
| Conductor |
: |
7N Cu D.U.C.C Stressfree 0.18mm x 34 strands x 2 cores (AWG 18) |
| Insulation |
: |
Polyethylene resin (Positive side), Polyolefin resin (Negative side) |
| Inner sleeve |
: |
Polyolefin resin |
| Shielding |
: |
Copper foil tape + Double layered 4N5 OFC (Horizontally winded) |
| Outer sleeve |
: |
UV resistant Polyurethane resin |
| Conductor resistance |
: |
28mΩ/m |
| Electrostatic capacitance |
: |
59pF/m |
|
| Center contact pin |
: |
Hollow shaped Tellurium copper |
| Negative side contact part |
: |
Deoxidized Phosphor copper |
| Plating |
: |
Rhodium plating |
| Cover |
: |
Aluminum + Carbon fiber |
|
| Contact parts |
: |
Brass |
| Plating |
: |
Gold |
| Cover |
: |
Die-cast Zinc |
Standard length of 7N-A2110 Leggenda RCA are 0.6m · 1.0m · 1.5m.
Standard length of 7N-A2110 Leggenda XLR are 1.0m · 1.5m.
Special length order available. |
| D.U.C.C stands for Dia Ultra Crystallized Copper which is specifically developed copper wire for high-end audio cables. D.U.C.C has controlled crystal structure and the minimized transmission loss. Patent technology and registered trade mark of Mitsubishi Materials LTD. |
|
| Fe |
Ni |
Si |
Al |
| 0.03 |
0.003 |
0.04 |
0.005 |
| S |
Ag |
Na |
K |
| 0.05 |
0.04 |
0.004 |
< 0.005 |
| U |
Th |
H |
O |
| < 0.0002 |
< 0.0003 |
< 0.03 |
< 1.0 |
|
| Typical Analysis(impurities) |
ppm/GD-MS Gas Analysis |
|
●The standard, the specification, and the price of the product might change without a previous notice.
●"ACROLINK®" and "Stressfree®" are registered trademarks of Acro Japan Co., Ltd.
●"D.U.C.C.®" is a registered trademark of Mitsubishi Materials Corporation.
|
|
|
|
|
|
